UNIVERSAL Materials Testing Machine | QC-508M2F & 513M2F(5kN)

Home / Products / Tensile Testing Machine / UNIVERSAL materials testing machine
Product Serial : QC-508M2F & 513M2F(5kN)
UNIVERSAL materials testing machine
Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

The table type has good configuration with multiple function with small space requirement. The maximum test capacity can reach to 5 kN. This model is good choice for standard specimen and small finish products. It also provides a quite test environment and high precision test result.
This model is using special testing software which is used Windows 7/8 of Person computer. It can do tensile test, compression test, bending test and all kind of test. The software with multi-languages is very easy to operation. It also has all kind of metric units, real-time graphs and also provides complete analysis test data which finish test can do variety of material analysis. The report configuration can be modified after test.
Multiple control systems can choose special displayer without connect computer (stand-alone) that can do simple test. It also can connect with computer which can do more functions. Fast external test button to do test. Standard equipped with sophisticated hand wheel which can be in precision position. The external signals can connect an external test signal function to expand tomachine operating modes.The load cell and extensometer of accessories also have memory function When change other type which does not need to do troublesome setting. Speed range can be set 0.0002 ~ 1000 mm/min which can meet


Industry:Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electron, Package, Medical, Architecture

Model QC-508M2F QC-513M2F
Max. Capacity 5kN
Units

Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force Resolution 31 bits
Force Precision 1/100,000
Test stroke(w/o grip) 800mm 400mm
Stroke resolution 0.0001 mm
Cantilever distance 70 mm
Speed range 0.0002 ~ 1000 mm/min adjustable (Set up by computerized)
Speed accuracy High speed mode
0.05~1000 mm/min
Low speed mode
0.0002 ~ 4 mm/min
PC-Port RJ45(TCP/IP)(Connect software optional)
Data sampling rate 1200Hz (Max.)
Hardware safety protection upper limit, lower limit, emergency stop button
Motor type Servo Motor
Feature

※Automatic reading of load cell feature information
※Automatic reading ofdisplacement sensor feature information
※force display, displacement display, time display, stress display and strain display
※External analog input (2-channel simultaneous reading of voltage or current)
※Test force automatically zero
※Test force self-defined calibration
※Break detection
※Automatic return
※Force overload protection

Power Supply Single phase 200V-240 V, 5A
Dimension of Machine 50 × 53 × 145 cm 50 × 53 × 100 cm
Weight of Machine 80kg 65kg

(1) Grip& Load Cell

Each test will require different test grips and accessories for the plastics, metal, biomedical, composite, elastomer, component, automotive, aerospace, textile and other applications industries.

★Tensile grip
★Compression grip
★Bending grip
★Peeling/Tearing grip
★Film friction grip
★Load cell

 

(2) Displayer

1. Adopted with 7- inch of TFT Color touch screen
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7.Various machine shutdown conditions setting (force, displacement, time, elongation).
8.Can be restored to the original factory state.
9.Unit selection can be Metric unit, Imperial units
10.Over-travel, overload protection and overtime machine stop
11.Can store up to 50 data, USB storage data function.
12.Support multiple sets of signal sources.

 

(3) Extensometer

1.QC-557 Short extensometerwhich is applied in under 50% of elongation test.



              
QC-557   QC-515

 

2.QC-515 Long extensometer which is applied in over 20% of elongation test.

1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
(1)Software interface (2)Report

*Cometech reserves ultimate modification right of product specification.