UNIVERSA Materials Testing Machine | QC-505D1 (50kN)

Home / Products / Tensile Testing Machine / UNIVERSA materials testing machine
Product Serial : QC-505D1 (50kN)
UNIVERSA materials testing machine

The floor model has a large test space and a long stroke, with a maximum test capacity of 50 kN. Large specimen test and expansion of new environmental test functions all can be easily planned.

Desktop electronic materials testing machine is equipped with a new design of D1 controller and 7-inch TFT color touch panel, which can be operated in a stand-alone model. Various units can be modified in accordance with the needs of users and display the real-time data and record testing process data in a short time. Data can be restored into flash drive through panel’s USB port and exported to EXCEL sheet for further analysis, or special software can also be an alternative option for proceeding with further data analysis.

Under Windows 7/8 of Personal computer that software can do tensile test, compression test, bending test, peeling test and all kind of tests, easy to learn and operate in multiple languages, various metric and imperial units, real-time graphs and also provides complete test data analysis, test report planning for more complete analysis or archive can be performed after test is complete.

Industry:Rubber, Plastic, Paper, Textile, metal, wood, tape, electron, package, Medical, Architecture.

 

Model QC-505D1
Max. capacity 50kN
Units Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force Resolution 23 bits
Force Precision 1/10,000
Test stroke(w/o grip) 1100mm
Stroke resolution 0.0025mm
Space between columns 425 mm (550mm, 680mm, 800mm optional)
Speed range 25~650 mm/min adjustable(By digital DIP switch)
Speed accuracy ±10%
PC-Port TCP/IP(Connect software optional)
Data sampling rate 1200Hz (Max.)
Hardware safety protection upper limit, lower limit, emergency stop button
Motor type DC motor
Stiffness Slop 5310kgf/mm
Transmission Timing belt, ball screw which can significantly reduce the noise and transmission losses, increase the transmission efficiency.
Feature ※The seal plate mining anode hardening which protect ball screw and increase service life and precision.
※connect with 7 -inch of TFT Color touch panel
※Real-time test graph display
※one set of load sensor and 2 sets of Encoder
※Flash drive connection panel can store all data on single test process.
※can be operated via panel or via optional software to connect computer to do test and data analysis.
※equip with overload and over-displacement instant protective detection
※Quick-release controllerto increase maintenance and replacement convenience
※Signal connector has a memory function, does not limit the number of sensors to replace.
Power Supply Single phase 110Vor 240 V
Dimension of Machine 90 x 60 x 200 cm
Weight of Machine 360kgf

 

(1)Grip & Load Cell
Each test will require different test grips and accessories for the plastics, metal, biomedical, composite, elastomer, component, automotive, aerospace, textile and other applications industries.

♦ Tensile grip
♦ Compression grip
♦ Bending grip
♦ Peeling/Tearing grip
♦ Film friction grip
♦ Load cell
 

(2) Displayer

1. Adopted with 7- inch of TFT Color touch screen.
2. Chinese, English, Japanese, Three different languages can be selected.
Data Display: Force, Stress, Torque, Displacement, Time.
4. Can do hardware setting, testing setting, unit setting, data setting .protection setting, graph setting
5. Unit selection can be Metric unit and Imperial units.
6. Can store up to 50 data..
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8.Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10.Over-travel, overload protection and overtime machine stop.
11.Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.

 

(3) Extensometer



              
QC-557 Short extensometer which
is applied in under 50% of elongation test.
  QC-551 Long extensometer which
is applied in over 20% of elongation test.

 

1. Data sample rate faster can be set up to 1200 Hz.
2. Operation method: Full-computerized control to run the test or Jog button control.
3. Compatible with Window 7 /8 system.
4. Software has multi-languages.
5. Interface for TCP/IP.
6. Multi-curves display and real-time plot.
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test.
14. Software protection: Overload, over -displacement, over-time protection.

(1)Software interface (2)Report

*Cometech reserves ultimate modification right of product specification.