Manual Thermos Press Forming Machine

Home / Products / Rubber and Plastic / Manual Thermos Press Forming Machine
Product Serial : QC-601A
Manual Thermos Press Forming Machine

QC-601A has two separate (up and down) heating plates. It is use jack to make two plates to clamp mold or sample and resulting in high pressure and high heat environment. It common uses thermoplastic material into mold and clamp between and touched upper and lower platen. The mold of temperature will melted the sample, then pressure it and the raw material will be forming. It can do physical property of test, color comparison and as the sample use purposes.

 

Industry: Rubber, plastic

Model QC-601A
Pressure(Tons) 5 10 20 30 50
Pressure is from the pressure gauge which shows on the pressure of conversion table.
Temperature Room temperature ~ 300℃
Temperature range Temperature rise rate:50℃~150℃→within 18 minutes
Cooling rate:150℃~50℃→within 10 minutes
Cooling method Cooling water circulation(optional)
Timer 0 ~ 999 minutes
Size of heating- plate 25x25cm (standard) 30x30cm (optional)
Interval distance
between heating plates
60~100 mm(adjustable)
Accessory forming mold for specimen  1set
Power Single phase,220V/50Hz or 60Hz,30A
Dimension 47 × 62 × 145 cm 
Weight 260 kg 

 

Test Video         Teaching material SOP        Test Case

  • QC-601B Manual Thermos Press Forming Machine
  • QC-602B Hydraulic Press Forming Machine
  • QC-602A Hydraulic Hot Forming Press Machine
  • QC-603 Manual Specimen Punching Machine
  • QC-603A Manual Specimen Punching Machine
  • QC-603C Pneumatic Specimen Punch
  • QC-603G Hardness Specimen Cutting Device
  • QC-601T Manual Thermos Press Forming Machine
  • QC-508M1 Universal testing Machine
Related Products